Popular Articles
Connecting an EID Reader
Following are some instructions on how to configure your EID reader wit the YardsTech® Scales. Note that you will have to use the YardsTech® App to configure the Bluetooth settings with your YardsTech® Scales. If your EID reader is in the table below ...
Forcing the YardsTech® Scales into WiFi Hotspot mode.
Regardless of how the YardsTech® Scales have been configured, you can always force it into WiFi hotspot mode (access point mode) by following these simple instructions: 1. With the unit powered down, press and hold the power button. 2. The red ...
Calibrating load bars
Introduction The YardsTech® Scales will work with almost any type of load bars/cells, however they may need to be calibrated to the particular load bars/cells you are using. Also over time load bars/cells can move out of specification on their own ...
Using the YardsTech® Scales with Stockbook
You can connect your YardsTech® Scales to Stockbook in a couple of different ways: Connect via WiFi - this is the preferred method to connect the YardsTech® Scales to Stockbook and if you are connecting an EID reader directly to your YardsTech® ...
Changing the unit's WiFi hotspot name
Changing the WiFi hotspot name may be useful if you wish to run two YardsTech® Scales in close proximity to each other. If both WiFi hotspots have the same name, it could lead to problems connecting to the correct unit. This option is only available ...